// Copyright 2015 PingCAP, Inc. // // Licensed under the Apache License, Version 2.0 (the "License"); // you may not use this file except in compliance with the License. // You may obtain a copy of the License at // // http://www.apache.org/licenses/LICENSE-2.0 // // Unless required by applicable law or agreed to in writing, software // distributed under the License is distributed on an "AS IS" BASIS, // See the License for the specific language governing permissions and // limitations under the License. package ddl import ( "fmt" "math/bits" "strings" "sync/atomic" "time" "github.com/cznic/mathutil" "github.com/pingcap/errors" "github.com/pingcap/failpoint" "github.com/pingcap/parser/ast" "github.com/pingcap/parser/model" "github.com/pingcap/parser/mysql" "github.com/pingcap/tidb/ddl/util" "github.com/pingcap/tidb/infoschema" "github.com/pingcap/tidb/meta" "github.com/pingcap/tidb/meta/autoid" "github.com/pingcap/tidb/sessionctx" "github.com/pingcap/tidb/table" "github.com/pingcap/tidb/types" "github.com/pingcap/tidb/util/logutil" "github.com/pingcap/tidb/util/sqlexec" "go.uber.org/zap" ) // adjustColumnInfoInAddColumn is used to set the correct position of column info when adding column. // 1. The added column was append at the end of tblInfo.Columns, due to ddl state was not public then. // It should be moved to the correct position when the ddl state to be changed to public. // 2. The offset of column should also to be set to the right value. func adjustColumnInfoInAddColumn(tblInfo *model.TableInfo, offset int) { oldCols := tblInfo.Columns newCols := make([]*model.ColumnInfo, 0, len(oldCols)) newCols = append(newCols, oldCols[:offset]...) newCols = append(newCols, oldCols[len(oldCols)-1]) newCols = append(newCols, oldCols[offset:len(oldCols)-1]...) // Adjust column offset. offsetChanged := make(map[int]int, len(newCols)-offset-1) for i := offset + 1; i < len(newCols); i++ { offsetChanged[newCols[i].Offset] = i newCols[i].Offset = i } newCols[offset].Offset = offset // Update index column offset info. // TODO: There may be some corner cases for index column offsets, we may check this later. for _, idx := range tblInfo.Indices { for _, col := range idx.Columns { newOffset, ok := offsetChanged[col.Offset] if ok { col.Offset = newOffset } } } tblInfo.Columns = newCols } // adjustColumnInfoInDropColumn is used to set the correct position of column info when dropping column. // 1. The offset of column should to be set to the last of the columns. // 2. The dropped column is moved to the end of tblInfo.Columns, due to it was not public any more. func adjustColumnInfoInDropColumn(tblInfo *model.TableInfo, offset int) { oldCols := tblInfo.Columns // Adjust column offset. offsetChanged := make(map[int]int, len(oldCols)-offset-1) for i := offset + 1; i < len(oldCols); i++ { offsetChanged[oldCols[i].Offset] = i - 1 oldCols[i].Offset = i - 1 } oldCols[offset].Offset = len(oldCols) - 1 // For expression index, we drop hidden columns and index simultaneously. // So we need to change the offset of expression index. offsetChanged[offset] = len(oldCols) - 1 // Update index column offset info. // TODO: There may be some corner cases for index column offsets, we may check this later. for _, idx := range tblInfo.Indices { for _, col := range idx.Columns { newOffset, ok := offsetChanged[col.Offset] if ok { col.Offset = newOffset } } } newCols := make([]*model.ColumnInfo, 0, len(oldCols)) newCols = append(newCols, oldCols[:offset]...) newCols = append(newCols, oldCols[offset+1:]...) newCols = append(newCols, oldCols[offset]) tblInfo.Columns = newCols } func createColumnInfo(tblInfo *model.TableInfo, colInfo *model.ColumnInfo, pos *ast.ColumnPosition) (*model.ColumnInfo, int, error) { // Check column name duplicate. cols := tblInfo.Columns position := len(cols) // Get column position. if pos.Tp == ast.ColumnPositionFirst { position = 0 } else if pos.Tp == ast.ColumnPositionAfter { c := model.FindColumnInfo(cols, pos.RelativeColumn.Name.L) if c == nil { return nil, 0, infoschema.ErrColumnNotExists.GenWithStackByArgs(pos.RelativeColumn, tblInfo.Name) } // Insert position is after the mentioned column. position = c.Offset + 1 } colInfo.ID = allocateColumnID(tblInfo) colInfo.State = model.StateNone // To support add column asynchronous, we should mark its offset as the last column. // So that we can use origin column offset to get value from row. colInfo.Offset = len(cols) // Append the column info to the end of the tblInfo.Columns. // It will reorder to the right position in "Columns" when it state change to public. tblInfo.Columns = append(cols, colInfo) return colInfo, position, nil } func checkAddColumn(t *meta.Meta, job *model.Job) (*model.TableInfo, *model.ColumnInfo, *model.ColumnInfo, *ast.ColumnPosition, int, error) { schemaID := job.SchemaID tblInfo, err := getTableInfoAndCancelFaultJob(t, job, schemaID) if err != nil { return nil, nil, nil, nil, 0, errors.Trace(err) } col := &model.ColumnInfo{} pos := &ast.ColumnPosition{} offset := 0 err = job.DecodeArgs(col, pos, &offset) if err != nil { job.State = model.JobStateCancelled return nil, nil, nil, nil, 0, errors.Trace(err) } columnInfo := model.FindColumnInfo(tblInfo.Columns, col.Name.L) if columnInfo != nil { if columnInfo.State == model.StatePublic { // We already have a column with the same column name. job.State = model.JobStateCancelled return nil, nil, nil, nil, 0, infoschema.ErrColumnExists.GenWithStackByArgs(col.Name) } } return tblInfo, columnInfo, col, pos, offset, nil } func onAddColumn(d *ddlCtx, t *meta.Meta, job *model.Job) (ver int64, err error) { // Handle the rolling back job. if job.IsRollingback() { ver, err = onDropColumn(t, job) if err != nil { return ver, errors.Trace(err) } return ver, nil } failpoint.Inject("errorBeforeDecodeArgs", func(val failpoint.Value) { if val.(bool) { failpoint.Return(ver, errors.New("occur an error before decode args")) } }) tblInfo, columnInfo, col, pos, offset, err := checkAddColumn(t, job) if err != nil { return ver, errors.Trace(err) } if columnInfo == nil { columnInfo, offset, err = createColumnInfo(tblInfo, col, pos) if err != nil { job.State = model.JobStateCancelled return ver, errors.Trace(err) } logutil.BgLogger().Info("[ddl] run add column job", zap.String("job", job.String()), zap.Reflect("columnInfo", *columnInfo), zap.Int("offset", offset)) // Set offset arg to job. if offset != 0 { job.Args = []interface{}{columnInfo, pos, offset} } if err = checkAddColumnTooManyColumns(len(tblInfo.Columns)); err != nil { job.State = model.JobStateCancelled return ver, errors.Trace(err) } } originalState := columnInfo.State switch columnInfo.State { case model.StateNone: // none -> delete only columnInfo.State = model.StateDeleteOnly ver, err = updateVersionAndTableInfoWithCheck(t, job, tblInfo, originalState != columnInfo.State) if err != nil { return ver, errors.Trace(err) } job.SchemaState = model.StateDeleteOnly case model.StateDeleteOnly: // delete only -> write only columnInfo.State = model.StateWriteOnly ver, err = updateVersionAndTableInfo(t, job, tblInfo, originalState != columnInfo.State) if err != nil { return ver, errors.Trace(err) } // Update the job state when all affairs done. job.SchemaState = model.StateWriteOnly case model.StateWriteOnly: // write only -> reorganization columnInfo.State = model.StateWriteReorganization ver, err = updateVersionAndTableInfo(t, job, tblInfo, originalState != columnInfo.State) if err != nil { return ver, errors.Trace(err) } // Update the job state when all affairs done. job.SchemaState = model.StateWriteReorganization case model.StateWriteReorganization: // reorganization -> public // Adjust table column offset. adjustColumnInfoInAddColumn(tblInfo, offset) columnInfo.State = model.StatePublic ver, err = updateVersionAndTableInfo(t, job, tblInfo, originalState != columnInfo.State) if err != nil { return ver, errors.Trace(err) } // Finish this job. job.FinishTableJob(model.JobStateDone, model.StatePublic, ver, tblInfo) asyncNotifyEvent(d, &util.Event{Tp: model.ActionAddColumn, TableInfo: tblInfo, ColumnInfo: columnInfo}) default: err = ErrInvalidDDLState.GenWithStackByArgs("column", columnInfo.State) } return ver, errors.Trace(err) } func onDropColumn(t *meta.Meta, job *model.Job) (ver int64, _ error) { tblInfo, colInfo, err := checkDropColumn(t, job) if err != nil { return ver, errors.Trace(err) } originalState := colInfo.State switch colInfo.State { case model.StatePublic: // public -> write only colInfo.State = model.StateWriteOnly // Set this column's offset to the last and reset all following columns' offsets. adjustColumnInfoInDropColumn(tblInfo, colInfo.Offset) // When the dropping column has not-null flag and it hasn't the default value, we can backfill the column value like "add column". // NOTE: If the state of StateWriteOnly can be rollbacked, we'd better reconsider the original default value. // And we need consider the column without not-null flag. if colInfo.GetOriginDefaultValue() == nil && mysql.HasNotNullFlag(colInfo.Flag) { // If the column is timestamp default current_timestamp, and DDL owner is new version TiDB that set column.Version to 1, // then old TiDB update record in the column write only stage will uses the wrong default value of the dropping column. // Because new version of the column default value is UTC time, but old version TiDB will think the default value is the time in system timezone. // But currently will be ok, because we can't cancel the drop column job when the job is running, // so the column will be dropped succeed and client will never see the wrong default value of the dropped column. // More info about this problem, see PR#9115. oldDVal, err := generateOriginDefaultValue(colInfo) if err != nil { return ver, errors.Trace(err) } err = colInfo.SetOriginDefaultValue(oldDVal) if err != nil { return ver, errors.Trace(err) } } ver, err = updateVersionAndTableInfoWithCheck(t, job, tblInfo, originalState != colInfo.State) if err != nil { return ver, errors.Trace(err) } job.SchemaState = model.StateWriteOnly case model.StateWriteOnly: // write only -> delete only colInfo.State = model.StateDeleteOnly ver, err = updateVersionAndTableInfo(t, job, tblInfo, originalState != colInfo.State) if err != nil { return ver, errors.Trace(err) } job.SchemaState = model.StateDeleteOnly case model.StateDeleteOnly: // delete only -> reorganization colInfo.State = model.StateDeleteReorganization ver, err = updateVersionAndTableInfo(t, job, tblInfo, originalState != colInfo.State) if err != nil { return ver, errors.Trace(err) } job.SchemaState = model.StateDeleteReorganization case model.StateDeleteReorganization: // reorganization -> absent // All reorganization jobs are done, drop this column. tblInfo.Columns = tblInfo.Columns[:len(tblInfo.Columns)-1] colInfo.State = model.StateNone ver, err = updateVersionAndTableInfo(t, job, tblInfo, originalState != colInfo.State) if err != nil { return ver, errors.Trace(err) } // Finish this job. if job.IsRollingback() { job.FinishTableJob(model.JobStateRollbackDone, model.StateNone, ver, tblInfo) } else { job.FinishTableJob(model.JobStateDone, model.StateNone, ver, tblInfo) } default: err = errInvalidDDLJob.GenWithStackByArgs("table", tblInfo.State) } return ver, errors.Trace(err) } func checkDropColumn(t *meta.Meta, job *model.Job) (*model.TableInfo, *model.ColumnInfo, error) { schemaID := job.SchemaID tblInfo, err := getTableInfoAndCancelFaultJob(t, job, schemaID) if err != nil { return nil, nil, errors.Trace(err) } var colName model.CIStr err = job.DecodeArgs(&colName) if err != nil { job.State = model.JobStateCancelled return nil, nil, errors.Trace(err) } colInfo := model.FindColumnInfo(tblInfo.Columns, colName.L) if colInfo == nil || colInfo.Hidden { job.State = model.JobStateCancelled return nil, nil, ErrCantDropFieldOrKey.GenWithStack("column %s doesn't exist", colName) } if err = isDroppableColumn(tblInfo, colName); err != nil { job.State = model.JobStateCancelled return nil, nil, errors.Trace(err) } return tblInfo, colInfo, nil } func onSetDefaultValue(t *meta.Meta, job *model.Job) (ver int64, _ error) { newCol := &model.ColumnInfo{} err := job.DecodeArgs(newCol) if err != nil { job.State = model.JobStateCancelled return ver, errors.Trace(err) } return updateColumnDefaultValue(t, job, newCol, &newCol.Name) } func (w *worker) onModifyColumn(t *meta.Meta, job *model.Job) (ver int64, _ error) { newCol := &model.ColumnInfo{} oldColName := &model.CIStr{} pos := &ast.ColumnPosition{} var modifyColumnTp byte var updatedAutoRandomBits uint64 err := job.DecodeArgs(newCol, oldColName, pos, &modifyColumnTp, &updatedAutoRandomBits) if err != nil { job.State = model.JobStateCancelled return ver, errors.Trace(err) } return w.doModifyColumn(t, job, newCol, oldColName, pos, modifyColumnTp, updatedAutoRandomBits) } // doModifyColumn updates the column information and reorders all columns. func (w *worker) doModifyColumn( t *meta.Meta, job *model.Job, newCol *model.ColumnInfo, oldName *model.CIStr, pos *ast.ColumnPosition, modifyColumnTp byte, newAutoRandBits uint64) (ver int64, _ error) { dbInfo, err := checkSchemaExistAndCancelNotExistJob(t, job) if err != nil { return ver, errors.Trace(err) } tblInfo, err := getTableInfoAndCancelFaultJob(t, job, job.SchemaID) if err != nil { return ver, errors.Trace(err) } oldCol := model.FindColumnInfo(tblInfo.Columns, oldName.L) if job.IsRollingback() { ver, err = rollbackModifyColumnJob(t, tblInfo, job, oldCol, modifyColumnTp) if err != nil { return ver, errors.Trace(err) } job.FinishTableJob(model.JobStateRollbackDone, model.StateNone, ver, tblInfo) return ver, nil } if oldCol == nil || oldCol.State != model.StatePublic { job.State = model.JobStateCancelled return ver, infoschema.ErrColumnNotExists.GenWithStackByArgs(oldName, tblInfo.Name) } // If we want to rename the column name, we need to check whether it already exists. if newCol.Name.L != oldName.L { c := model.FindColumnInfo(tblInfo.Columns, newCol.Name.L) if c != nil { job.State = model.JobStateCancelled return ver, infoschema.ErrColumnExists.GenWithStackByArgs(newCol.Name) } } failpoint.Inject("uninitializedOffsetAndState", func(val failpoint.Value) { if val.(bool) { if newCol.State != model.StatePublic { failpoint.Return(ver, errors.New("the column state is wrong")) } } }) if newAutoRandBits > 0 { if err := checkAndApplyNewAutoRandomBits(job, t, tblInfo, newCol, oldName, newAutoRandBits); err != nil { return ver, errors.Trace(err) } } // Column from null to not null. if !mysql.HasNotNullFlag(oldCol.Flag) && mysql.HasNotNullFlag(newCol.Flag) { noPreventNullFlag := !mysql.HasPreventNullInsertFlag(oldCol.Flag) // Introduce the `mysql.PreventNullInsertFlag` flag to prevent users from inserting or updating null values. err = modifyColsFromNull2NotNull(w, dbInfo, tblInfo, []*model.ColumnInfo{oldCol}, newCol.Name, oldCol.Tp != newCol.Tp) if err != nil { if ErrWarnDataTruncated.Equal(err) || errInvalidUseOfNull.Equal(err) { job.State = model.JobStateRollingback } return ver, err } // The column should get into prevent null status first. if noPreventNullFlag { return updateVersionAndTableInfoWithCheck(t, job, tblInfo, true) } } // We need the latest column's offset and state. This information can be obtained from the store. newCol.Offset = oldCol.Offset newCol.State = oldCol.State // Calculate column's new position. oldPos, newPos := oldCol.Offset, oldCol.Offset if pos.Tp == ast.ColumnPositionAfter { if oldName.L == pos.RelativeColumn.Name.L { // `alter table tableName modify column b int after b` will return ver,ErrColumnNotExists. // Modified the type definition of 'null' to 'not null' before this, so rollback the job when an error occurs. job.State = model.JobStateRollingback return ver, infoschema.ErrColumnNotExists.GenWithStackByArgs(oldName, tblInfo.Name) } relative := model.FindColumnInfo(tblInfo.Columns, pos.RelativeColumn.Name.L) if relative == nil || relative.State != model.StatePublic { job.State = model.JobStateRollingback return ver, infoschema.ErrColumnNotExists.GenWithStackByArgs(pos.RelativeColumn, tblInfo.Name) } if relative.Offset < oldPos { newPos = relative.Offset + 1 } else { newPos = relative.Offset } } else if pos.Tp == ast.ColumnPositionFirst { newPos = 0 } columnChanged := make(map[string]*model.ColumnInfo) columnChanged[oldName.L] = newCol if newPos == oldPos { tblInfo.Columns[newPos] = newCol } else { cols := tblInfo.Columns // Reorder columns in place. if newPos < oldPos { copy(cols[newPos+1:], cols[newPos:oldPos]) } else { copy(cols[oldPos:], cols[oldPos+1:newPos+1]) } cols[newPos] = newCol for i, col := range tblInfo.Columns { if col.Offset != i { columnChanged[col.Name.L] = col col.Offset = i } } } // Change offset and name in indices. for _, idx := range tblInfo.Indices { for _, c := range idx.Columns { if newCol, ok := columnChanged[c.Name.L]; ok { c.Name = newCol.Name c.Offset = newCol.Offset } } } ver, err = updateVersionAndTableInfoWithCheck(t, job, tblInfo, true) if err != nil { // Modified the type definition of 'null' to 'not null' before this, so rollBack the job when an error occurs. job.State = model.JobStateRollingback return ver, errors.Trace(err) } job.FinishTableJob(model.JobStateDone, model.StatePublic, ver, tblInfo) return ver, nil } func checkAndApplyNewAutoRandomBits(job *model.Job, t *meta.Meta, tblInfo *model.TableInfo, newCol *model.ColumnInfo, oldName *model.CIStr, newAutoRandBits uint64) error { schemaID := job.SchemaID newLayout := autoid.NewAutoRandomIDLayout(&newCol.FieldType, newAutoRandBits) // GenAutoRandomID first to prevent concurrent update. _, err := t.GenAutoRandomID(schemaID, tblInfo.ID, 1) if err != nil { return err } currentIncBitsVal, err := t.GetAutoRandomID(schemaID, tblInfo.ID) if err != nil { return err } // Find the max number of available shard bits by // counting leading zeros in current inc part of auto_random ID. availableBits := bits.LeadingZeros64(uint64(currentIncBitsVal)) isOccupyingIncBits := newLayout.TypeBitsLength-newLayout.IncrementalBits > uint64(availableBits) if isOccupyingIncBits { availableBits := mathutil.Min(autoid.MaxAutoRandomBits, availableBits) errMsg := fmt.Sprintf(autoid.AutoRandomOverflowErrMsg, availableBits, newAutoRandBits, oldName.O) job.State = model.JobStateCancelled return ErrInvalidAutoRandom.GenWithStackByArgs(errMsg) } tblInfo.AutoRandomBits = newAutoRandBits return nil } // checkForNullValue ensure there are no null values of the column of this table. // `isDataTruncated` indicates whether the new field and the old field type are the same, in order to be compatible with mysql. func checkForNullValue(ctx sessionctx.Context, isDataTruncated bool, schema, table, newCol model.CIStr, oldCols ...*model.ColumnInfo) error { colsStr := "" for i, col := range oldCols { if i == 0 { colsStr += "`" + col.Name.L + "` is null" } else { colsStr += " or `" + col.Name.L + "` is null" } } sql := fmt.Sprintf("select 1 from `%s`.`%s` where %s limit 1;", schema.L, table.L, colsStr) rows, _, err := ctx.(sqlexec.RestrictedSQLExecutor).ExecRestrictedSQL(sql) if err != nil { return errors.Trace(err) } rowCount := len(rows) if rowCount != 0 { if isDataTruncated { return ErrWarnDataTruncated.GenWithStackByArgs(newCol.L, rowCount) } return errInvalidUseOfNull } return nil } func updateColumnDefaultValue(t *meta.Meta, job *model.Job, newCol *model.ColumnInfo, oldColName *model.CIStr) (ver int64, _ error) { tblInfo, err := getTableInfoAndCancelFaultJob(t, job, job.SchemaID) if err != nil { return ver, errors.Trace(err) } oldCol := model.FindColumnInfo(tblInfo.Columns, oldColName.L) if oldCol == nil || oldCol.State != model.StatePublic { job.State = model.JobStateCancelled return ver, infoschema.ErrColumnNotExists.GenWithStackByArgs(newCol.Name, tblInfo.Name) } // The newCol's offset may be the value of the old schema version, so we can't use newCol directly. oldCol.DefaultValue = newCol.DefaultValue oldCol.DefaultValueBit = newCol.DefaultValueBit oldCol.Flag = newCol.Flag ver, err = updateVersionAndTableInfo(t, job, tblInfo, true) if err != nil { job.State = model.JobStateCancelled return ver, errors.Trace(err) } job.FinishTableJob(model.JobStateDone, model.StatePublic, ver, tblInfo) return ver, nil } func isColumnWithIndex(colName string, indices []*model.IndexInfo) bool { for _, indexInfo := range indices { for _, col := range indexInfo.Columns { if col.Name.L == colName { return true } } } return false } func getColumnForeignKeyInfo(colName string, fkInfos []*model.FKInfo) *model.FKInfo { for _, fkInfo := range fkInfos { for _, col := range fkInfo.Cols { if col.L == colName { return fkInfo } } } return nil } func allocateColumnID(tblInfo *model.TableInfo) int64 { tblInfo.MaxColumnID++ return tblInfo.MaxColumnID } func checkAddColumnTooManyColumns(colNum int) error { if uint32(colNum) > atomic.LoadUint32(&TableColumnCountLimit) { return errTooManyFields } return nil } // rollbackModifyColumnJob rollbacks the job when an error occurs. func rollbackModifyColumnJob(t *meta.Meta, tblInfo *model.TableInfo, job *model.Job, oldCol *model.ColumnInfo, modifyColumnTp byte) (ver int64, _ error) { var err error if modifyColumnTp == mysql.TypeNull { // field NotNullFlag flag reset. tblInfo.Columns[oldCol.Offset].Flag = oldCol.Flag &^ mysql.NotNullFlag // field PreventNullInsertFlag flag reset. tblInfo.Columns[oldCol.Offset].Flag = oldCol.Flag &^ mysql.PreventNullInsertFlag ver, err = updateVersionAndTableInfo(t, job, tblInfo, true) if err != nil { return ver, errors.Trace(err) } } return ver, nil } // modifyColsFromNull2NotNull modifies the type definitions of 'null' to 'not null'. // Introduce the `mysql.PreventNullInsertFlag` flag to prevent users from inserting or updating null values. func modifyColsFromNull2NotNull(w *worker, dbInfo *model.DBInfo, tblInfo *model.TableInfo, cols []*model.ColumnInfo, newColName model.CIStr, isModifiedType bool) error { // Get sessionctx from context resource pool. var ctx sessionctx.Context ctx, err := w.sessPool.get() if err != nil { return errors.Trace(err) } defer w.sessPool.put(ctx) // If there is a null value inserted, it cannot be modified and needs to be rollback. err = checkForNullValue(ctx, isModifiedType, dbInfo.Name, tblInfo.Name, newColName, cols...) if err != nil { return errors.Trace(err) } // Prevent this field from inserting null values. for _, col := range cols { col.Flag |= mysql.PreventNullInsertFlag } return nil } func generateOriginDefaultValue(col *model.ColumnInfo) (interface{}, error) { var err error odValue := col.GetDefaultValue() if odValue == nil && mysql.HasNotNullFlag(col.Flag) { switch col.Tp { // Just use enum field's first element for OriginDefaultValue. case mysql.TypeEnum: defEnum, verr := types.ParseEnumValue(col.FieldType.Elems, 1) if verr != nil { return nil, errors.Trace(verr) } defVal := types.NewCollateMysqlEnumDatum(defEnum, col.Collate) return defVal.ToString() default: zeroVal := table.GetZeroValue(col) odValue, err = zeroVal.ToString() if err != nil { return nil, errors.Trace(err) } } } if odValue == strings.ToUpper(ast.CurrentTimestamp) { if col.Tp == mysql.TypeTimestamp { odValue = time.Now().UTC().Format(types.TimeFormat) } else if col.Tp == mysql.TypeDatetime { odValue = time.Now().Format(types.TimeFormat) } } return odValue, nil } func findColumnInIndexCols(c string, cols []*model.IndexColumn) *model.IndexColumn { for _, c1 := range cols { if c == c1.Name.L { return c1 } } return nil } func getColumnInfoByName(tbInfo *model.TableInfo, column string) *model.ColumnInfo { for _, colInfo := range tbInfo.Cols() { if colInfo.Name.L == column { return colInfo } } return nil }